Skip to content

More WIFI APs

  • Network Survey (run speed tests from various locations around house)
  • Create new dice password for admin interface
  • Connect new router via LAN port to existing LAN
  • Timezone Pacific Time (UTC-0800)
  • Settings - "Device A" (existing device)
    • Tp-Link Id/Cloud Service: Disable
    • Wireless
      • Wireless Settings
        • OFDMA: Enable
        • Smart Connect: Disabled
          • Unable to set channel settings on AX50 with Smart Connect enabled.
        • Wireless Settings - 2.4 GHz
          • Security: WPA/WPA2-Personal
          • Version: WPA2-PSK
          • Encryption: AES
          • Mode: 802.11b/g/n/ax mixed
          • 2.4 GHz Channel Width: 20 MHz
          • 2.4 GHz Channel: 1
          • Transmit Power: Middle (TBR)
          • Airtime Fairness Feature: Disabled
        • Wireless Settings - 5 GHz
          • Security: WPA/WPA2-Personal
          • Version: WPA2-PSK
          • Encryption: AES
          • Mode: 802.11b/g/n/ax mixed
          • 5 GHz Channel Width: 80 MHz (TBR)
          • 5 GHz Channel: 36
          • Airtime Fairness Feature: Disabled
          • Multi-User MIMO: Enable Multi-User MIMO
    • Advanced
      • System
        • Administration
          • Local Management via HTTPS: Enable
          • Local Managers: All Devices
        • Operation Mode: Access Point Mode
      • System Tools
        • Reboot Schedule
          • Reboot Schedule: Enabled
          • Reboot Time: 3:00 AM
          • Repeat: Every Week Monday
        • System Parameters
          • WPS: Disabled

  • Settings - "Device B" (new device)

    • Internet
      • LAN
        • IP Type: Static IP
        • IP Address: 192.168.0.2
        • Subnet Mask: 255.255.255.0
        • Default Gateway: 192.168.0.1
        • Primary DNS: 9.9.9.9
        • Secondary DNS: 149.112.112.112
    • Wireless
      • Wireless Settings
        • OFDMA: Enable
        • TWT: Disabled
        • Smart Connect: Enable
        • Security: WPA-PSK[AES]
        • Transmit Power: Low
        • 2.4 GHz Channel Width: 20 MHz
        • 2.4 GHz Channel: 11
        • 5 GHz Channel Width: 20/40/80 MHz
        • 5 GHz Channel: 149
      • WPS
        • WPS: Disabled
    • Advanced
      • System
        • Access Point Mode
        • Reboot Schedule
          • Reboot Schedule: Enabled
          • Reboot Time: 3:00 AM
          • Repeat: Every Week Monday
    • Smart Connect: Enabled
      • This lets the device use the same wirelss setting (e.g., SSID) and the device manages band assignment
    • Configure new access point